Please fill out the below form completely to request information about our products. Our team will follow up with you promptly.
Please fill out the below short form to validate your voucher.
A standard drop inlet (a form of a catch basin) is a below-ground square box precast concrete structure with a horizontal square opening.
Typically, a slotted or perforated metal grate is set into the top of the drop inlet to bring it to ground level to allow water to enter into the structure.
During a heavy rain storm, water drains from the surface area into the grate openings of the drop inlet. The water then drains into a stormwater pipe that is connected to the drop inlet. Many catch basins can be linked with pipe to create a network of drainage points. The water moves to its destination through the system of pipes, using gravity.
A Cost-Effective Solution
Drop inlets are a cost-effective alternative option to custom-made catch basins. A major advantage of a drop inlet is that an installer can make as-needed on-site adjustments to it. For example, holes must be made at certain elevations of the drop inlet, to accommodate certain size pipes. If a contractor ordered a custom-made catch basin and the project specifications changed (hole elevation, hole size, hole orientation), the custom structure would be useless and a new one is needed.
Precast concrete drop inlets manufactured by A.J. Foss are AASHTO HS20-44 Traffic-Rated.
Drop Inlet Uses and Applications
A partially recessed shape is cast-In to the concrete during the casting process, leaving a wall that can be broken on site to create the desired opening shape or size. Oval knock-outs are offered in multiple locations to provide access for pipes required. Hole size and locations can vary, and knock-outs are easily broken with a hammer to create desired opening shape and size. Up to 15-inch pipe can be used with drop inlet knockouts.
A shaped opening is cast-In to the concrete during the casting process, leaving a hole-specific access opening for Pipe or Box Culvert. Round cast-in openings are offered in multiple locations to provide access for pipes, and opening sizes and locations can vary. Rubber boots can be used with this option.
Contact us to discuss your projects throughout New Hampshire, Maine and Northern Massachusetts that require wastewater and stormwater products, and discover the A.J. Foss difference for yourself.
When the gentleman showed up Friday morning, I Knew that he had been on the road for two or so hours and arrived promptly at 8 AM He Was friendly and had the bulkhead installed in ...Full Testimonial >
Your driver certainly knows how to give excellent customer service and I really appreciated not just what he did, but most of all his helpful and encouraging attitude. This kind of...Full Testimonial >
I just wanted to thank you for all of your help involving my precast step replacement.Full Testimonial >
Are you struggling to make a decision on the best septic tank solution for your NH, MA, VT or ME property. This article answers a number of common questions related to various cha...Full Article >
This article details the benefits of an innovative / advanced septic system when lot restrictions prevent you from increasing your house size.Full Article >
Choosing a Septic Treatment System is an important decision for homeowners. This article compares the NORWECO wastewater treatment system against the closest competitor.Full Article >
Many factors, such as a small lot, require homeowners to cope with the limitations of a small leachfield on their property, prompting them to seek an alternative septic system solu...Full Article >
Waterfront property is abundant throughout New Hampshire, Maine and Massachusetts. For properties along these waterfronts, AJ Foss offers the ideal solution – the NORWECO Singula...Full Article >
In many communities, particularly ones located near water bodies or with homes that depend on wells for drinking water – property owners are being encouraged or even required to ...Full Article >